service routine

1. This article helps device driver developers test the interrupt service routine as much as possible by simulating the various interrupts.
   本文通过模拟各种中断，尽可能地帮助设备驱动程序开发人员测试中断服务例程。
2. It also registers an interrupt service routine's address to service interrupts generated when wireless data is sent or received.
   它还会注册一个中断服务例程的地址以服务收发无线数据时产生的中断。
3. Even the jiffies ( small packets of kernel time for timing interrupts) are not altered and this lets you debug the Interrupt Service Routine.
   此时连jiffies（用来对中断进行计时的内核时钟滴答数）都不会改变，这样就可以对ISR进行调试了。
4. The orinoco interrupt service routine populates sk_buffs with data received from the WLAN and passes it on to the IP stack via netif_rx.
   orinoco中断服务例程用从WLAN接收的数据填充skbuffs，并经由netifrx将它传送到IP栈。
5. The kernel thread ( s) will be initialized in the open entry point of the driver, provided request_irq succeeds on successful registration of the interrupt service routine, for instance.
   内核线程可以在驱动程序的open函数中进行初始化，例如当中断服务例程成功注册时，就提供成功的requestirq。
6. The address of an interrupt service routine.
   中断服务程序所在的地址。
7. A VAX/ VMS interrupt service routine that is activated by a software interrupt at a fork interrupt priority level ( IPL).
   VAX/VMS的一种中断服务子程序，在分叉中断优先级（pl）软件中断激活。
8. When an interrupt occurs, the current state of the processor is saved and an interrupt service routine is executed.
   当一个中断发生，当前的处理器状态被保存并且中断服务程序开始运行。
9. The amount of time between the assertion of an interrupt and the start of the associated interrupt service routine.
   在中断发生和相关的中断服务程序运行之间的时间长短。
10. Aim Objective: To master the timer T0, T1 of the mode selection and programming methods, to understand the design method of the interrupt service routine, and learn skills in real-time debugging.
    实验目的目的：掌握定时器T0、T1的方式选择和编程方法，了解中断服务程序的设计方法，学会实时程序的调试技巧。
11. In some computers the interrupt vector is an address that points to a location in memory where the beginning address of the I/ O service routine is stored.
    在一些计算机中，中断向量是一个地址，它指向存储器中存储I/O服务程序其实地址的单元。
12. At last, we use Object Oriented design program method to analyze and design the service routine of net software dog.
    最后，我们使用面向对象程序设计的方式剖析和设计网络加密锁的服务程序。
13. The key part is that on the basis of Object Oriented analyze and design designs the service routine system of net software dog.
    基于面向对象剖析和设计来设计网络加密锁的服务程序是体系的核心部门。
14. An address that usually tells a processor to use a service routine.
    一种地址，它通常指示处理机去执行一个服务例行程序。
15. This text applys with UML technology of Object Oriented to analysis and design, use UML describe a series of view model of the service routine of net software dog in the design processes.
    本文采取UML技术入行面向对象的剖析与设计，使用UML描述网络锁服务程序设计入程中的一系列的视图模型。
16. When the interrupt service routine exits control of the processor is returned to whatever part of the software was previously running.
    当中断服务程序退出，对处理器的控制权转到先前运行的那个软件上。
17. Information and information is productivity, is logistics service routine "unknown hero".
    信息、情报是生产力，是后勤服务工作的无名英雄。
18. At last, in the section of software design, startup code programming, operating system choosing and transplanting, task design, drivers design and interrupt service routine design had been discussed.
    最后，在软件设计部分探讨了启动代码编写、操作系统的选择和移植、任务规划和设计、驱动程序设计以及中断服务程序设计。
19. The main program and interrupt service routine ( ISR) are realized by using modularized software design method.
    软件采用模块化软件设计的方法设计了控制系统主程序、中断服务程序及中断服务子程序。
20. According to the hardware scheme of control system, the software realization scheme is given, which includes: the design flow chart of harmonic separating algorithm, the main program and its interrupt service routine.
    根据控制系统的硬件设计，确定了软件实现方案，给出了主程序及其中断服务程序、谐波分离算法程序的设计流程图。
21. According to the requirement of output waveform, the main program of control system, interruption service routine, and subroutines were designed by using modularized software design method.
    根据系统输出波形的需要，采用模块化软件设计的方法设计了控制系统主程序，中断服务程序以及子程序。
22. We discuss the software modules of the device, including the main routine and the interrupt service routine.
    在硬件设计的基础上，完成了装置各软件模块的设计：包括主程序模块和中断服务子程序模块。
23. Interrupt service routine ( ISR) is the most important peripheral accessing method.
    中断是主机与外部设备交互的最重要的方法。
24. Resident and application of Interrupt Service Routine
    中断服务程序的驻留与应用
25. FTP's security issue of that service routine appearing most likely.
    FTP服务程序很可能出现的安全方面的问题。
26. Then there is a discussion of the architecture of the interrupt service routine designing for the real-time system. A basic scheme which can be followed for the program designing has been supplied.
    然后对实时系统的中断服务程序设计的结构进行了探讨，为具体的程序设计提出了可遵循的基本框架。
27. Based on the hardware circuit designs and the depth knowledge of three-phase inverter modulation technique, phase lock technology and control technology, the system software is designed, including the main program design, interrupt service routine design and the main control software design.
    在逆变器的硬件设计基础上，根据三相逆变器的调制技术、锁相技术和控制技术原理，进行了系统软件设计。主要包括主程序设计、中断程序的设计和主要控制软件设计。
28. Secondly, software system design is introduced, the main program flow chart and source code of A/ D converter is given. Specially the design idea of sampling rotary encoder switch with software is analyzed, flow chart of interruption service routine is provided.
    接着介绍了软件系统的设计方案，给出了主程序流程图和A/D转换器通信部分的源代码，着重分析了软件采样旋转编码开关的设计思路，并给出了中断服务程序的流程图。
29. Software design flow chart of software analyze on main program, initialization procedure, the master program, ADC interrupt service routine, GPIO port inspection procedures and display program, and analyze on reliability of the software.
    软件设计采用软件流程图的形式分析了主程序、初始化程序、主控程序、ADC中断服务程序、GPIO口检测程序以及显示程序的编写思路，并对软件的可靠性做了相应的分析。
30. Analysis and design of the driving power of the main control program and the interrupt service routine.
    分析并设计了驱动电源的主控制程序及中断服务程序。

noun

1. a routine that can be used as needed

   Synonym:    utility routine